CRM Software - CABC | Maximizer | Maximizer Add-ons | Services | Support | Store | News

    Find out about Linktracker for Maximzier
CABC    Maxtalk  Hop To Forum Categories  Maximizer CRM Software  Hop To Forums  Maximizer Support    Issue with licenses
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
New Member
Posted
We have 8 licenses registered at our facility. Currently only one person can get in. I have tried everything that has been recommended with the pervasive database. When more than one person tries to log-in, it tells me that "You do not have enough licenses. You have a 0 license pack."
Any suggestions???
 
Posts: 3 | Registered: November 06, 2007Reply With QuoteEdit or Delete MessageReport This Post
Maximizer Specialist
Picture of CABC Support
Posted Hide Post
You have likely encountered a problem with the gateway configuration and/or the pervasive licensing. I would suggest you check where the Pervasive Gateway is assigned (it should be assigned to the machine that is acting as the server and has the licenses installed on it). Maximizer suggest that the instructions for configuring this are contained in pages 30-32 of the Maximizer 9 Manual.

To determine which machine should be the gateway you should run the License Administrator found in the Other Utilities menu under Start>>Programs>>Pervasive. Run this on each machine, the machine with multiple licenses installed should be the gateway.

If neither of the machines have the extra licenses setup then you should pick one to be the gateway, configure it as above and then reapply the Pervasive Licenses in the Maximizer Administrator under Utilities>>Install Multi User License.
 
Posts: 470 | Location: PO Box 162,Newbury,Berks | Registered: January 03, 2000Reply With QuoteEdit or Delete MessageReport This Post
New Member
Posted Hide Post
The gateway is assigned on our server. Each computer shows one license on it and the server shows 9. Any other ideas? Does your company come out and fix maximizer issues?
 
Posts: 3 | Registered: November 06, 2007Reply With QuoteEdit or Delete MessageReport This Post
Maximizer Specialist
Picture of CABC Support
Posted Hide Post
C.A.B.C Ltd does indeed offer a support service, we tend to find that most issues can be solved via remote access using a tool called Netviewer, site visits are generally only needed in rare cases.

If you'd like to discuss our hourly rates and the possibility of booking some time from a consultant I'd suggest calling our sales line on 01635 570970.

Back to the issue in hand though, have you checked both the Pervasive and Maximizer licenses installed on the server?
 
Posts: 470 | Location: PO Box 162,Newbury,Berks | Registered: January 03, 2000Reply With QuoteEdit or Delete MessageReport This Post
New Member
Posted Hide Post
I went under administrator in Maximizer and it shows 8 licenses there. I went into the pervasive License Administrator and the 9 licenses are there. Could they not be linked together properly? If so, how can I fix it?
 
Posts: 3 | Registered: November 06, 2007Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

CABC    Maxtalk  Hop To Forum Categories  Maximizer CRM Software  Hop To Forums  Maximizer Support    Issue with licenses

© CABC Ltd 2002 - 2005. All Rights Reserved.
Maximizer is a trademark of Maximizer Software inc.